Uno

Solid modularity: Uno is a versatile and potentially infinite system. The click-fastening assembly system means extended shelving systems can be put up in no time, safely and without the use of screws or bolts. The reinforced shelves are built to withstand heavy loads and, when placed side-by-side, they guarantee convenient continuity. A host of accessories and a broad range of colours mean that Uno can be used in any setting and, when you move, the system can be taken down and adapted to the new environment, even in different configurations.

The compositions shown and proposed here are just some examples, this system allows you to create multiple solutions according to your needs. Just contact our customer service for this type of request!

Models and Dimensions:

- UNO OFFICE COMP. 1 - Width 205 x depth 30 x height 202 cm

- UNO BOOKCASE COMP. 2 - Width 305 x depth 30 x height 202 cm

- UNO WARDROBE COMP. 3 - Width 505 x depth 60 x height 202 cm

Technical details:

- Uprights in 30 x 30 mm tubular metal measuring 1.2 mm in thickness, fitted with plastic caps at the ends. Along the entire length, one side features slots with a pitch of 50 mm for the variable positioning of the click fasteners and hence of the shelves. The use of tubular metal, which provides higher performance levels than the more
commonly used open section bars, ensures minimal torsional and flexural effects.

- Click fasteners made of pressed sheet metal, 2.5 mm thick. These fasteners are anchored to the uprights using two purpose-designed side fins which fit into the slots in the uprights. The shelves then click onto the upper fins of the actual click-fasteners. Every click fastener is designed to support 2 consecutive shelves simultaneously, enveloping and concurrently reinforcing the upright to which it is anchored.

- Shelves in 0.7 mm thick sheet metal folded three times along the two front sides to prevent accidents; omega-shaped reinforcements are envisaged on the underside to increase their load capacity. The four corners of the shelves are further reinforced with a 3 mm thick sheet metal support that is designed to house the upright completely; this ensures perfect continuity between two consecutive shelves, without any gaps.